电话:0755-29489855
24小时热线:15112577329 联系人:李小姐
网站首页 | 关于我们 | 产品展示 | 产品总汇 | 润滑油知识 | 新闻资讯 | 在线订购 | 联系我们
润滑油分类
液压油系列
齿轮油系列
空气压缩机润滑油
防锈油(液)系列
油性金属切削油系列
轴承和循环油系统油系列
机床导轨油/导热油
涡轮机润滑油(透平油(汽轮机油)
冷冻机油系列
真空泵润滑油系列
火花电蚀油系列
船舶及发电柴油机油润滑油
水溶性金属切削液系列
造纸机油和乳化型切削液
低噪音润滑脂系列
半合成切削液和绝缘油
针织机油润滑油
车用油和乳化型切削液
白矿油和锭子油系列
防火液压油
(合成)空气压缩机油
钻岩多机能润滑油
柴油发动机油成型油系列
机床主轴油&透平油
润滑脂系列
耐高温和特殊润滑脂
开式齿轮油和闭式齿轮油
食品润滑脂&食品润滑油
全合成切削液系列
矿山油系列
THK/NSK/LUBE润滑油
液力传动油
 
产品展示 >> 福斯RENOLIN UNISYN CKC 150
福斯RENOLIN UNISYN CKC 150详细说明 (浏览2483次)

RENOLIN UNISYN CKC

Polyalphaolefin-Based Industrial Gear and Lubricating Oils

Designed for use in industrial gearboxes and general lubricating systems subject to high temperatures, RENOLIN UNISYN CKC oils are fully-synthetic lubricants based on polyalphaolefins. RENOLIN UNISYN CKC oils lower friction and reduce wear. Furthermore, these oils increase the efficiency of machine components. Depending on the application, a number of viscosity grades can be satisfied by a single RENOLIN UNISYN CKC oil. This allows users to rationalize stocks and cut costs. Polyalphaolefins, and thus RENOLIN UNISYN CKC oils, are miscible and compatible with mineral oils at all ratios and can be disposed-of as such. The compatibility of polyalphaolefins with common machinery materials, seals and paint finishes is comparable with that of mineral oils. Changing-over to RENOLIN UNISYN CKC is therefore very simple and requires no prior flushing. RENOLIN UNISYN CKC oils can be classified as CKC lubricating oils according to ISO 6743-6.

The specific benefits of using RENOLIN UNISYN CKC oils are:

  • Extremely good ageing resistance
  • Excellent corrosion protection
  • Good cold-flowing properties
  • Excellent viscosity-temperature behaviour
Application:

RENOLIN UNISYN CKC oils can be used in bearings, lubrication systems and gearboxes subject to high or fluctuating temperatures.
In gearboxes and lubricating systems where the sump temperatures exceed 90°C, normal mineral oil change intervals can be significantly extended with RENOLIN UNISYN CKC oils which, in turn, substantially lower operating and disposal costs.
When changing-over to RENOLIN UNISYN CKC oils in machines and equipment which operate at temperatures of over 60°C, one viscosity grade lower than the normal mineral oil grade should be selected.

RENOLIN UNISYN CKC 68 100 150 220 320 460 680
Lubricating oil type
acc. to ISO 6743-6 CKC 68 CKC 100 CKC 150 CKC 220 CKC 320 CKC 460 CKC 680
acc. to DIN 51 502 HC 68 HC 100 HC 150 HC 220 HC 320 HC 460 HC 680
Characteristics Unit Test method
Kinematic viscosity
at 40 °C mm²/s 72 104 151 221 315 479 668 ASTM D 445
at 100 °C mm²/s 11.1 14.9 19.4 25.8 33.3 45 62 ASTM D 445
Viscosity index 146 149 147 148 148 149 159 ASTM D 2270
Density at 15 °C kg/l 0.837 0.842 0.848 0.85 0.851 0.853 0.855 ASTM D 1298
Flash point, Cleveland open cup °C 248 254 230 232 234 304 262 ASTM D 92
Pour point °C -51 – 45 – 45 – 42 – 39 – 33 – 33 ASTM D 97
Neutralization number mg KOH/g 0.8 0.9 0.9 0.9 0.9 0.9 0.9 ASTM D 974
Foaming,
seq. I ml 5/0 5/0 5/0 5/0 5/0 5/0 5/0 ASTM D 892 seq. I III
seq. II ml 15/0 15/0 15/0 15/0 15/0 15/0 15/0 ASTM D 892 seq. I III
seq. III ml 5/0 5/0 5/0 5/0 5/0 5/0 5/0 ASTM D 892 seq. I III
Copper corrosion degree of corr. 1a-100A24 1a-100A24 1a-100A24 1a-100A24 1a-100A24 1a-100A24 1a-100A24 ASTM D 130
Rust prevention pass B pass B pass B pass B pass B pass B pass B ASTM D 665
Four ball EP test N 2200 2400 2400 2400 2400 2400 2400 ASTM D 2783
FZG mechanical gear rig test load stage > 12 > 12 > 12 > 12 > 12 > 12 > 12 DIN 51 354-2
上一产品: 嘉实多RO150合成齿轮油
下一产品: 福斯RENOLIN UNISYN CKC 100
Copyright (C)  深圳市盈顺福实业有限公司 http://www.ysf68.com All Right Reserved
地址:广东省深圳宝安区松岗街道碧头第三工业区 电话:0755-29489855 网址:http://www.ysf68.com E-mail:2771003616@qq.com 
网站关键词:盈顺福润滑油|壳牌|美孚|合成齿轮油|工业润滑脂|工业润脂油 粤ICP备16123384号