电话:0755-29489855
24小时热线:15112577329 联系人:李小姐
网站首页 | 关于我们 | 产品展示 | 产品总汇 | 润滑油知识 | 新闻资讯 | 在线订购 | 联系我们
润滑油分类
液压油系列
齿轮油系列
空气压缩机润滑油
防锈油(液)系列
油性金属切削油系列
轴承和循环油系统油系列
机床导轨油/导热油
涡轮机润滑油(透平油(汽轮机油)
冷冻机油系列
真空泵润滑油系列
火花电蚀油系列
船舶及发电柴油机油润滑油
水溶性金属切削液系列
造纸机油和乳化型切削液
低噪音润滑脂系列
半合成切削液和绝缘油
针织机油润滑油
车用油和乳化型切削液
白矿油和锭子油系列
防火液压油
(合成)空气压缩机油
钻岩多机能润滑油
柴油发动机油成型油系列
机床主轴油&透平油
润滑脂系列
耐高温和特殊润滑脂
开式齿轮油和闭式齿轮油
食品润滑脂&食品润滑油
全合成切削液系列
矿山油系列
THK/NSK/LUBE润滑油
液力传动油
 
产品展示 >> FUCHS RENOLIN ZAF 32D
FUCHS RENOLIN ZAF 32D详细说明 (浏览2612次)

RENOLIN ZAF D

Zinc and Ash-Free, Detergent Hydraulic Oils

Zinc and Ash-Free, Detergent Hydraulic Oils

Zinc- and ash-free hydraulic oils have steadily gained popularity over the last few years. In many cases the use of a zinc-free hydraulic oil is a must, especially in machine tools where hydraulic oils can contaminate other functional fluids.
RENOLIN ZAF D hydraulic oils are zinc- and ash-free hydraulic oils with good detergent properties. The detergent agents in these oils reduce the formation of residues and ageing by-products.
They are HM hydraulic oils in line with ISO 6743-4 but with additional detergent and dispersant characteristics.

The most important features of RENOLIN ZAF D hydraulic oils are:

  • Good oxidation stability and good resistance to ageing
  • Powerful EP properties and very good wear protection
  • Excellent corrosion protection
  • Rapid air release and low foaming
  • Good sludge transportation and cleaning properties
  • Good compatibility with sealing materials
Application:

RENOLIN ZAF D products are high-grade HM hydraulic oils in line with ISO 6743-4 which can be used in all hydraulic systems but also as CKC lubricating oils in line with ISO 6743-6. RENOLIN ZAF D products contain additives which avoid the formation of residues and guarantee the functional reliability of machinery.

OLIN ZAF 32 D 46 D 68 D
Hydraulic oil type
acc. to ISO 6743-4 HM 32 HM 46 HM 68
acc. to DIN 51 502 HLPD 32 HLPD 46 HLPD 68
Lubricating oil type
acc. to ISO 6743-6 CKC 32 CKC 46 CKC 68
acc. to DIN 51 502 CLP 32 CLP 46 CLP 68
Characteristics Unit Test method
Colour 1 1 1 ASTM D 1500
Kinematic viscosity
at 40 °C mm²/s 32 46 68 ASTM D 445
at 100 °C mm²/s 5.4 6.9 8.6 ASTM D 445
Viscosity index 100 105 97 ASTM D 2270
Density at 15 °C kg/l 0.878 0.882 0.884 ASTM D 1298
Flash point, Cleveland open cup °C 210 230 230 ASTM D 92
Pour point °C -33 -27 -24 ASTM D 97
Neutralization number mg KOH/g 0.35 0.35 0.35 ASTM D 974
Saponification number mg KOH/g 1.1 1.1 1.1 ASTM D 94
Air release at 50 °C min 3 4 7 ASTM D 3427
Foaming,
seq. I ml 30/0 50/0 50/0 ASTM D 892 seq. I-III
seq. II ml 20/0 20/0 20/0 ASTM D 892 seq. I-III
seq. III ml 20/0 20/0 20/0 ASTM D 892 seq. I-III
Copper corrosion degree of corr. 1a-100A3 1a-100A3 1a-100A3 ASTM D 130
Rust prevention pass A pass A pass A ASTM D 665
Ageing behaviour, increase in neutralization number after 1000 h mg KOH/g < 2 < 2 < 2 ASTM D 943
Brugger boundary friction test N/mm² 38 38 38 DIN 51 347 (D)
FZG mechanical gear rig test load stage > 12 > 12 > 12 DIN 51 354-2
Vickers vane pump test, loss of mass
on ring mg <120 <120 <120 IP 281
on vanes after 250 h mg <30 <30 <30 IP 281
Effect on SRE-NBR 1 seal material acc. to DIN 53 538-1 at 100 °C +/– 1 °C after 7 days +/– 2 hours,
relative volume change % 7 6 5 DIN 53 521 together with DIN 53 505
change in Shore A hardness Shore -3 -3 -2 DIN 53 521 together with DIN 53 505
上一产品: 嘉实多Anvol™ WG 46 乙二醇防火液压液
下一产品: FUCHS RENOLIN HV 100
Copyright (C)  深圳市盈顺福实业有限公司 http://www.ysf68.com All Right Reserved
地址:广东省深圳宝安区松岗街道碧头第三工业区 电话:0755-29489855 网址:http://www.ysf68.com E-mail:2771003616@qq.com 
网站关键词:盈顺福润滑油|壳牌|美孚|合成齿轮油|工业润滑脂|工业润脂油 粤ICP备16123384号